Recent verscheen firmware 4.45 en deze was bedoeld voor onder andere meer stabiliteit op de PlayStation 3. Helaas had deze firmware een averechts effect en klaagden veel gebruikers over een console die niet meer werkte. Sony haalde de firmware weer snel offline en beloofde verbetering in de vorm van een nieuwe firmware update.

Deze firmware update is vandaag verschenen en kent versienummer 4.46. Deze update fixt de problemen die versie 4.45 veroorzaakte evenals wat andere netwerk issues. Als je te maken hebt met een console die niet naar behoren functioneert, hieronder stappen waarmee je dit hoogstwaarschijnlijk kunt verhelpen.

Handmatig firmware 4.46 downloaden

  • You will need a USB Mass Storage device such as a USB flash drive with at least 168 MB of free space. If your PS3 is either CECHA00/CECHB00 series model, you can also use Memory Stick™, SD Memory Card, and CompactFlash®.
  • Create a folder named “PS3” on the storage media or USB device.
  • Within the PS3 folder, create a folder named “UPDATE”.
  • Using your computer, click the following hyperlink to begin downloading system software 4.46
  • Download the update data from the webpage and save it in the “UPDATE” folder.
  • Location: Save in the “PS3” folder > “UPDATE” folder
  • File name: Save as file name “PS3UPDAT.PUP”

Als de data niet op de juiste manier wordt opgeslagen, dan zal de PlayStation 3 de update data niet herkennen. De namen van de verschillende mappen moeten allemaal in hoofdletters geschreven worden.

Activeer safe modus

  • With the PS3 off (power light should be red), touch and hold the Power button, you will hear the 1st beep indicating that the PS3 is powering on.
  • Continue to hold the power button, and after approximately 5 seconds you will hear a 2nd beep.
  • Continue to hold the power button and after 5 more seconds you’ll hear a 3rd beep, and system will power off (Power light goes red).
  • Release power button.
  • Touch and hold the Power button, you will hear the 1st beep, again for PS3 power on.
  • Continue to hold and after approximately 5 seconds you will hear the 2nd beep for video reset.
  • Continue to hold and after 5 seconds you will hear a quick double beep. At that point release power button.
  • If you succeeded in activating Safe Mode, you will see a message on screen saying, “Connect the controller using a USB cable and then press the PS button”.
  • Connect a controller to the PS3 with a USB cable.

Handmatig PS3 software updaten

  • Connect the storage media to PS3 system.
  • Select [6 – System Update] and Press X.
  • Please note: Data and settings may be deleted if you choose any of the first (5) options. Please make sure to only choose option [6 – System Update].
  • Press Start and Select at the same time.
  • The PS3 system will restart and recognizes the update file in the storage media.
  • Press right on the d-pad to scroll through the update description and user agreement.
  • Press X to confirm the update.
  • The system will now install the new system software and restart automatically upon completion.

Als het niet lukt om de safe modus van de PlayStation 3 te activeren dan zal de console ondersteuning van Sony nodig hebben. Indien je het wel voor elkaar krijgt om de bovenstaande stappen uit te voeren, dan zou de console na het updaten weer moeten werken zoals voorheen.